Your Price
$8.02
In Stock
Maytag Washer Suspension Spring
★★★★★ ★★★★★ 27 ReviewsPartSelect Number PS11743345
Manufacturer Part Number WP63907
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could cause the load to be off-balance which can lead to excessive shaking, moving, noise, and leaks. For this repair, you will need a 1/4 nut driver, a putty knife, a flat blade screwdriver, and a pair of needle-nose pliers. Disconnect the power supply, fill hoses, and drain hose to give you safe and easy access (have a container nearby for water left in drain hose). This item is sold individually, which is important as you may need to repair multiple springs in your appliance, which carries three suspension springs. As an inexpensive part, we recommend purchasing several at a time, as they can be very useful to have on-hand.
Fixes these symptoms
- Leaking
- Shaking and Moving
- Spinning Issues
- See more...
Installation Instructions
Brian from Seattle, WA
Washer tub slammed into washer body during spin cycle
If you load a washing machine unevenly, it will spin out of balance. But our washer seemed to make noise during the spin cycle regardless of how the load was distributed. I suspected that the suspension or balancing springs were getting tired, and ordered a replacement set. First I disconnected the washer from the water and power supply, then I laid it on its back. The tub rested on the back of the washer, making two of the three suspension springs relax, and they were pretty easy to pull out with pliers. After the first two were out, I had to support the tub with a couple 2x4s to relax the third suspension spring. Installation was the reverse of removal - install the lower suspension spring, remove the 2x4s, then install the two other suspension springs. The tub balancing spring was easy to replace, and probably wasn't the cause of the problem. With $25 in parts and about 15 minutes, my washer spins much more quietly.
In Stock
Maytag Washer Agitator Repair Kit
★★★★★ ★★★★★ 202 ReviewsPartSelect Number PS334650
Manufacturer Part Number 285811
This kit (Medium Cam Agitator Repair Kit, Washer Agitator Cam Repair Kit, Cam Agitator) is used to repair the agitator. These parts are located inside the agitator auger near the top. You will need to remove the softener dispenser first if your model is equipped with one. This part is driven by the output shaft of the transmission to move the clothes during a wash cycle. The agitator auger rotates one way but not the other, which forces the laundry down and out for a constant tumbling during the wash cycle. The agitator is subjected to a lot of force during the washer wash cycle. Constant and frequent use of the appliance can cause damage, especially during heavy loads. If you’re experiencing a noisy agitator, or an agitator that spins freely in both directions, then it may be in need of repairs. If your agitator is no longer agitating properly, your clothes will not tumble, and will not be washed properly. The agitator repair kit includes an agitator cam, 4 directional cogs, a bearing, thrust spacer, inner cap seal, and a washer. It is constructed of plastic and rubber, and comes in black/white.
Fixes these symptoms
- Does not dispense fabric softener or detergent
- Leaking
- Marks left on clothes
- See more...
Installation Instructions
Matt from Pawtucket, RI
Upper portion of agitator, no longer pushing clothing down.
The instructions came with the repair kit, it was fairly simple and straight foward. One bolt held the entire agitator unit in the washer, as well as held the upper and lower halves together. Once that nut was removed the two halves seperated and the plastic clutch pieces could easily be replaced wtih the new onces in the repair kit. Very easy do-it-yourself repair! Took about 20 minutes because I was being cautious. Next time I could do it in 5 minutes.
Genuine OEM Maytag Washer Parts
Everyone knows that if you want a washing machine for life, get a Maytag washer. Maytag has been producing sturdy and reliable top-load and front-load washers for over 100 years. However, this doesn’t mean that they don’t require maintenance and occasional repair. If you are experiencing difficulties draining your Maytag washer, or notice loud banging coming from inside during use, rest assured that these and many other symptoms can easily be repaired.
PartSelect has warehouses across the USA, and we are proud to offer same-day and next-day shipping for your customers in select regions. If that’s not enough, we offer 365-day returns, just for your convenience. So, if it’s time to perform some maintenance or repairs on your Maytag washer, have a look at our wide variety of drain pumps, filters, door switches, motors, and more!
-
Fit - Quality
- Warranty
Common Maytag Washing Machine Problems and How to Fix Them
Don’t worry if you think repairing your Maytag washing machine is difficult. Our expert repair tips are at your service to help you locate and fix any issues you may have. You can depend on our knowledge to make troubleshooting your washer smooth and effective.
Noisy Maytag Washing Machine – You may be alarmed by hearing strange noises coming from your Maytag washing machine. There are lots of moving parts inside so it’s common to hear a variety of noises like grinding or knocking when it runs. You can often determine the cause by isolating the part of the machine that produces the noises. Usually, these noises are associated with parts that experience movement and decay over time, such as the rumbling of a clogged pump or the knocking of an old drive belt.
Leaking Maytag Washing Machine – Your Maytag washing machine has many parts that manage the flow of water, so it is not uncommon to see parts like pumps or hoses become damaged or clogged over time. This can often lead to your machine developing leaks. To handle the issue, look over the area where the water is coming from and ensure that all connections are tightly fastened, and no blockages can be found. This guarantees that your machine operates without any water leakage.
Maytag Washing Machine Will Not Start – It can be irritating to find your Maytag washing machine not starting. Often this is related to a damaged start switch or drive motor, but it could also be related to a broken door or lid switch. After verifying that the problem is not simply due to a loose power cable in your washer, you should first inspect the lid or door switch for any damages which would not allow this to latch, then move on to the electrical parts such as the start switch and drive motor. By addressing these areas, you can identify and fix your problem, ensuring your washing machine is able to start.
Maytag Washing Machine Will Not Spin – Considering the number of moving parts within your Maytag washing machine, it is not uncommon to hear that some parts like the direct drive motor coupling and door locks can become worn over time. This can lead to problems like your appliance not being able to spin. By investigating these areas of your appliance, you can quickly identify your problem and get repairs underway, allowing your washing machine to correctly spin when in use.
Maytag Washing Machine Does Not Drain – When your Maytag washing machine fails to drain, it may be as simple as inspecting the parts needed for effective drainage. This is commonly caused by issues such as a blockage or restriction in a hose, or within the pump itself. By examining these areas, you can diagnose and tackle the problem, ensuring your washing machine is able to drain water efficiently.
